1. Interior tank weld is cracked
Solution: Replace water tank or weld open weld area;
2. The seal ring is damaged
< p >Solution: Replace the seal ring;3. The water tank is not installed correctly
Solution: Reinstall it;
4. is not closed properly
p>
Solution: Turn off the water supply switch;
5. The vacuum collection tube is broken
Solution: Ask. a professional to replace the vacuum tube;
6. Loose joints and fittings
Solution: Reconnect or replace fittings;
7. Bad valve or broken metal. pipe (shower leak)
Solution: Replace the valve or metal pipe;
8. The lid temperature is too high.
Solution:
(1) The system has poor circulation and the gas is blocked. The installation position of the pipe should be adjusted so thatthe pipe has an upward slope in the direction of water flow, so that the defect can be eliminated;
(2) The inlet and outlet water pipes of the collector are poorly connected, causing the water flow to short circuit. It needs to be reinstalled. The collector inlet and outlet pipes must be in two diagonal positions. This is the standard installation method;
9. The overflow pipe is clogged.
Solution. : Unblock the overflow water pipe;