Leaks in solar sewer pipes are usually caused by a leak in the inner tank or the aging of the outlet pipe joint. If the inner tank leaks, you need to find professional after-sales personnel to handle it. .
If the water outlet pipe sealing ring is getting old, you can find a piece of wire or cotton thread and carefully wrap it around the leak area, then roll it up carefully after wrapping it. , use 502 glue to soak all the coils, just wait for the glue to dry.
Treatment methods:
1. Close the indoor water line valve and stop the water supply. Then use a wrench to remove the gasket at the leak point to see if the gasket's pipe connections are damaged. If it is damaged, simply replace it with a new one.
2. If there is no damage, you should checkcheck if the head of the sewer pipe is flat, smooth it, then connect the joints. Pay attention to gaskets that must be installed tightly to prevent leaks. once again.
3. If inspection shows that there is water leakage between the pipe fittings, you need to disassemble the pipe fittings, wrap the raw material tape around the threaded position, and then reconnect the pipe fittings. he.
4. If PVC pipes are used, the leaking parts must be cut out, then the new PVC pipes must be installed with glue. And if there is water leakage at the joint, it should be wrapped with raw material tape and put back in place.