Diameter 0.5m and height 1.2m. Linorit has the only national scientific and technological progress award in industry and the only national housing industrialization base. Linorit's technological advancement path has gone from ordinary vacuum tube solar water heaters to flat panel solar water heaters to hot water by air heat pump. then to the air source heat pump for heating. The size of Linorite 100 liter water heater is 0.5m in diameter and 1.2m in height. This wall-mounted solar water heater is suitable for high-rise and low-rise users in the city.
What are the wall requirements for installing a wall-mounted solar water heater?
The dimensions of the Sanle solar mount are: 1550mm long, 43mm wide and 1.5mm thick. According to Sanle official website, the size of the solar mount is 1550*43*1.5mm. Sanle solar brackets are made of aluminum alloy and other matteerials. They have excellent oxidation resistance, corrosion resistance, light weight and high strength. They are simple and practical to install. roofs, floors, water surfaces, etc. Occasionally, it is used for the installation and fixing of solar panels to maximize the use of solar energy, reduce the use of traditional energy and is environmentally friendly, economical and safe.
Under normal circumstances, the vacuum tubes of Sun wall-mounted solar water heaters we use are 1 meter long. The water capacity of each vacuum tube is approximately 4 to 5 pounds of water. people at home using water you may need to use 30 tubes and the horizontal row is approximately 1.6 meters. Total weight is approximately 150 pounds. Under normal circumstances, commercial buildings can support this weight, and the width can fully accommodate this size. The charactersPeople working in the property management office are not allowed to interfere with the installation of solar energy. After all, the state has made it clear that commercial buildings seven stories or less must set aside solar power lines. However, property management must be informed in advance.