Car solar film, commonly known as explosion-proof film, refers to a film stuck on the surface of automobile glass. It not only has the explosion-proof function, but also can insulate, insulate and transmit light. Special polyester film is usually used as the base material to make high-quality explosion-proof membranes. The film itself has strong toughness and special pressure-sensitive adhesive. In the event of an accident, even if the glass breaks, it can be broken without harming anyone. Today's automobile explosion-proof film also has the function of one-way perspective and glare reduction.
Functions of explosion-proof solar film
1. Thermal insulation and cooling to create a comfortable solar film in the automobile environment .
Explosion-proof solar film can reduce light intensity.
Play the rolethermal insulation and maintaining the freshness of the car. In addition, the thermal insulation rate of automobile explosion-proof solar film can reach 50%-70%, which can effectively reduce the use intensity of automobile air conditioning and save fuel.
2. Prevent the glass from breaking and hurting people
When a car accident occurs, Explosion-proof solar film can prevent glass from splashing and avoid glass fragments in accidents that can cause injury to people in the car and improve the safety of the car. 3. Prevent ultraviolet rays and protect human skin
Ultraviolet rays from the sun can damage human skin. If you are exposed to ultraviolet rays for a long time, you are prone to skin diseases. Since the explosion-proof solar film can effectively block ultraviolet rays, it has poIts function is to protect the skin.
4. Protect car interiors and extend the life of interiors.
When exposed to sunlight, heat can build up in interior trim such as seat cushions and dashboards due to the action of infrared rays. If exposed to infrared rays for a long time, the interior decoration will age and fade. Solar film has a good protective effect on interior decoration.
5. One-way perspective, improve privacy in the car. The explosion-proof and airtight solar film has a good one-way perspective. Sticking anti-obstruction purple explosive solar film on the car windows can block the view outside the car and improve concealment inside the car. It is subtle and deep and meets most people's taste.
Identifiedcation of solar film quality
There are many types of solar films of varying quality, so you should distinguish them carefully when purchasing.
1. Look
Light transmission is the preferred factor. Inferior film usually gives people a foggy feeling, which not only affects the appearance, but sometimes also affects driving safety. Color is the second element of choice. High-quality solar film pigments are high-quality products that can penetrate the solar film and maintain their original color for a long time. During the pasting process of low-grade solar film, the color will fall off after scraping operation, but high-quality solar film will not. Bubbles are the third element of choice. The plastic liner of the solar film must be torn off and then resealed. A high quality solar filmt still maintain its original color after being closed, while poor quality solar film will cause blistering.
Touch
When you touch high-quality solar film, you will feel thick and smooth, while one Inferior quality solar film the membrane will be thin and brittle.
Try
A very important factor that reflects the quality of the solar film is the thermal insulation of the solar film, but it is necessary to evaluate the solar film. For the quality of the film, eyes and hands alone are not enough. If conditions permit, a comparative test can be carried out. First, place a piece of glass with high-quality solar film on the tungsten iodine lamp and only feel slight heat with your hands. If you replace the glass with poor quality solar film, your hands will immediately become very hot. In a general way, solar films certified by the General Administration of Quality Supervision, Inspection and Quarantine are reliable in terms of thermal insulation.
Also, when choosing the color of the film, place it on the window with the door closed, and do not distinguish its color in the sun. Since the color of any film is very light in the sun, you can only achieve the desired effect by trying it in the car without color errors. @2019