If the water pressure in your home is sufficient and the water can flow and there are no leaks, it is likely that the water temperature and level sensor water is broken. This thing is easy to break. Just replace it. with a new one. Plus, it's winter now. If you are in the north, you must turn on the antifreeze, otherwise the pipes will freeze and water will not be supplied depending on the water temperature in the water tank. is high, it will gradually decrease and evaporate through the exhaust hole or overflow outlet.
What to do if the water pressure of the solar water heater is low
1. Ordinary solar water heaters are pressure-free products. The hot water outlet pressure mainly depends on the size of the drop. If the distance between the solar water outlet and the place of use is small, the hot water flow will be small and the pressure will be low when used.not. Especially for users who live on the top floor, they will feel it clearly when using. once again. The solution is to appropriately increase the height of the solar power to increase the height difference, or use larger diameter upper and lower water pipes.
2. The pipeline is long and has bends, which hinders the flow of hot water. The solution is to rearrange the pipes.
3. If there is a blockage at the water inlet or outlet or upper and lower water pipes, the solution is for after-sales service personnel to come to the house for inspection.
How to use solar electric water heaters correctly
1. When refilling water when the weather is extremely hot and the water temperature is extremely high, you should use the water supply valve to limit the temperature. pressureand add water. It is strictly prohibited to add water after the water is used up. Fortunately, turn on the water before sunrise in the morning or two hours after sunset in the evening, to ensure the life of the water heater.
2. Each water heater has a vent at the top. It is normal for water to flow out when the water is full. It will stop after the water supply valve is closed. (This situation will not occur with water heaters equipped with temperature and water level indicators).
3. Electric heater: The power of the electric heater is 1500W. If it is used on cloudy days or in winter when the water temperature is not sufficient, do not plug it in for a long time. The power should be turned off when taking a shower. Once plugged in, if the red light on the leak protection cap lights up, it means it is heating up, and if the green light turns onume, this means that the water temperature has reached 65°C.
4. When the temperature is not too low (7℃-5℃), after exhausting the water at night, there is still hot water left in the water heater (water in the vacuum tube), and it must be filled with water immediately. Reduce the internal water temperature of the water heater, reduce heat loss that night, and make full use of thermal energy.
5. If the temperature is particularly low, the water level in the water heater should be kept above 80%. If it is cloudy, please try to use water from the water heater and refill it immediately.
The water pressure of the solar water heater is very low and the water is very small. How to solve the problem?
Solar water is discharged by the height difference and water is discharged by the height difference. The pressure is too low. If the hot water flow is low, it is the problem of space in the chasolar water heater. The pipe needs to be replaced and the pipe diameter enlarged. There is now a type of compressor shower, which does not have an electric booster. .As long as the cold water flows normally, it can push the hot water out. After use, there will be at least 3 times more hot water than before use. It can also prevent hot and cold water, anti-scalding. anti-limescale, and the thermostatic valve eliminates the need to add a miniature booster pump to the outlet of the solar water heater.
The vertical drop between the solar water tank and the shower head of the bathroom is too large. Little ; too many turns of pipes and thin pipesThis also affects the hot water pressure; if the horizontal pipe is too long, it will also consume part of the water pressure; it is recommended to connect a booster pump in parallel to the pipe only for the bath, so that the problem is resolvedsolute; the water is low, it is estimated that the pipe is clogged or the faucet filter is clogged; Ordinary solar water heaters are non-pressure products, and the pressure of the hot water outlet mainly depends on the size of the drop. If the distance between the solar water outlet and the place of use is small, the hot water flow will seem low when used. The pressure is less, especially for those who live on the top floor in the morning, they will obviously feel it when using it again. Appropriately increase the height of solar power to increase the height difference, or use upper and lower water pipes with thicker diameters; the pipes are long and have bends, which interfere with the flow of hot water, and rearrange the pipes if there are blockages; at the water inlet and outlet or upper and lower water pipes, you can ask the peprofessional after-sales service personnel to come to your home for maintenance.