All solar water heaters will be equipped with a heat collection device, mainly flat type and vacuum tube type. At first there were also rubber bags and iron barrels. The water heater collects heat through the collector and stores it in the water tank, which increases the temperature in the water tank. You can use hot water when you come home from work. Xiangyang Solar (Air Energy) sales and maintenance center will answer your questions and hope to help you.
1. Close the water tap. 2. Next, loosen the leaking joint with a wrench. when disassembling it, first check whether the pipe connection at the joint is cracked; 3. If so, replace it. Otherwise, check if the pipe head is flat. After smoothing it out, reconnect the joint. .Aluminum Plastic pipe should be inserted into the joint. If you don't understand, you can ask a plumber for help. OnceOnce the pipe is installed, tighten the joint and there should be no leaks.
Relevant knowledge:
1. Generally speaking, solar water heaters can be divided into three types according to the water flow method: solar drying type, direct flow type and circulation type. . Solar water heater is a water heater that combines heat collection and storage into one. According to the different water storage containers, they can be divided into three types: shallow pool type, plastic bag type and cylindrical type. Circulating solar water heaters can be divided into natural circulation type, constant temperature automatic circulation type and forced circulation type according to different circulating power.
2. The circulating all-glass vacuum collector tube solar water heater uses the high absorption capacity and low emissivity of the vacuum collector tubeto convert absorbed solar radiation into thermal energy. to generate hot water. The characteristics of low density, the natural circulation of cold water from top to bottom and hot water from bottom to top in the vacuum tube gradually increases the temperature of all water to reach a certain temperature.
3. The vacuum glass tube being round, it has the particularity of naturally following the source of sunlight. In addition, the reflection principle of the reflector allows the glass tube to receive light from all sides. the heat collection effect lasts longer and the water temperature higher, it can work normally all year round, even in alpine areas.