How to clean the scale inside the solar water heater:
Hold a vacuum tube with both hands and rotate it back and forth to separate and loosen the ring. sealing the water tank, then push it into the water tank for a while, when the bottom can be. After the base is separated, remove the vacuum tube, pour out the water, then add some clean water, rinse it and pour it out, repeat this several times, rinse it thoroughly. before dismantling and cleaning the next one, and cleaning everything. After that, add water into the water tank, rinse the scale and debris into the water tank, and then install the vacuum tubes one by one. Before safety, carefully check whether the sealing ring. The water tank installation hole is intact. If damaged or aging, replace it with a new one. The scale in the vacuum tube floats in the water and will not stick to the inner wall of the rwater tank like scale in the thermos bottle, so it is relatively simple to clean, but you should be careful when disassembling and do not do it. use too much force to avoid damaging the vacuum tube.
Simply install an anti-limescale device for drinking water specially designed to eliminate scale on the cold water inlet pipe of the solar water heater. First, it prevents the generation of new scale during the heating process. the original tartar gradually softens and falls off on its own; thirdly, it improves thermal efficiency, prevents the heating rod from bursting, and extends the life of the solar water heater; fourth, it improves water quality;