Photovoltaic rack models and specifications may vary depending on different manufacturers and project needs. Here are some common models and specifications of photovoltaic racks:
1. Floor Bracket:
- Model: Fixed Bracket, Single Axis Tracking Bracket, Double. -Axis tracking brackets, etc.
- Specifications: bracket height, bracket angle, bracket material thickness, etc.
2. Roof supports:
2. p>
- Model: flat bracket, inclined bracket, slope adjustable bracket, etc.
- Specifications: bracket height, bracket angle, bracket material thickness, etc.
3 . Material type:
- Steel bracket: Commonly used materials include Q235 steel, Q345 steel, etc., and the thickness of the material is generally included between 2 and 4 mm.
- Aluminum alloy bracket: the materials commonly used ininclude 6061 aluminum alloy, 6082 aluminum alloy, etc. The thickness of the material is usually between 2 and 4 mm.
4. Other specifications:
- Mounting hole distance: The distance between the mounting holes of the bracket is generally 1-2 meters and can be adjusted according to specifications. circumstances.
- Wind and snow loads: The design of the support must take into account local wind and snow load standards to ensure the stability and safety of the support.
It should be noted that specific models and specifications of photovoltaic racks should be determined based on project needs, design requirements and local environmental conditions. It is best to consult a professional photovoltaic rack manufacturer or engineer for selection and design. .
Kesheng roof photovoltaic support case