Solar tire pressure monitoring is a historical update of the traditional tire pressure monitoring device (wireless tire pressure monitor). It consists of a sunscreen, 4 pressure sensors and a temperature sensor. Solar tire pressure monitoring is a historical update of the traditional tire pressure monitoring device (wireless tire pressure monitor). Its features are: real-time monitoring of tire pressure and permanent battery life! This solved a series of faults of previous tire pressure monitoring alarms, such as repeated charging, cigarette lighter port occupied and DVD display screen occupied! The composition of the solar tire pressure monitor is the same as that of the traditional wireless tire pressure monitor, consisting of solar shield, 4 sensorss pressure and a temperature sensor. Since the large solar panel has an extremely long lifespan and can be charged at any time, the energy storage is more durable and more powerful; it can still be used for more than 45 days even if there is no sunlight. equipped with USB charger type dual charging system device When the car starts, the acceleration sensor first sends a signal to the receiver, and then the monitored tire pressure and temperature signals are sent to the receiver when the receiver receives the signal. it will be displayed immediately.
While the car is driving, the solar tire pressure monitor sensor monitors data every 4 seconds. If there is no abnormality, to ensure energy saving, data is sent to the receiver every 20 seconds; If there is an abnormality, it will send data to the receiver every 4 seconds. The sunscreen is equippedequipped with vibration and sound detectors and has an intelligent auto power-off function to save energy. Divided into built-in and external types. 1. External solar tire pressure monitoring, features: simple installation, first step: make sure the solar screen (receiver host) is turned on; step two: unscrew the original tire valve cap; Step 4: Turn the wireless tire pressure monitoring sensor to the corresponding position; Step 5: Tighten the hex nut with a wrench. Step 6: When the sensors are installed in sequence, the receiver will immediately display the corresponding tire pressure. Tire pressure monitoring Integrated type, features: stable and efficient. Turn on the sunscreen before installation. Now follow the steps below: Remove the original valve from the tires. Step 2: Install the pressure monitoring sensorwireless tires according to specifications. Tire position. Step 3: Inflate the tire; Step 4: cover the valve; Step 5: Testing the dynamic balancing machine. Step 6: Adjust and counterweight, install the balance block until the end.