1. First of all, it is better to choose a cloudy day, morning or evening for disassembly, because you need to drain all the hot water from the water heater before disassembly (to avoid getting burned by the hot water that s infiltrates during disassembly). the pipe). If it is noon at this time, since the water in the vacuum tube has emitted light, the strong sunlight will damage the vacuum tube and shorten its service life.
2. When disassembling, it is best to use water soaked in detergent or washing powder to lubricate the vacuum tube. At the same time, pay attention to the angle of the vacuum tube and avoid it. pull the angle to prevent the vacuum tube from bursting. After disassembly, the vacuum tube must be packed in special polyester foam compartments and placed in special cartons to avoid shock during transportation. (The most important thing is to disassemble the vacuum tube, because this step is the most difficult and dangerous for theare non-professionals.)
3. Disassembly method: Use water and dish soap or laundry detergent. to lubricate the vacuum tube At the connection point with the water tank, turn it left and right and push it in slightly, then take out the other end of the vacuum tube from the circlip, and gently pull the tube out empty out of the water tank.