1. If the water tank liner is damaged, causing water to leak from the side seams of the water tank, the liner cannot be repaired and the water tank can only be replaced directly.
2. If the silicone ring or other accessories are damaged, causing leakage at the side seams of the water tank, the problem can be solved by directly replacing the accessories.
3. Repairing water leaks at the side seams of the bucket requires professional personnel to repair it.
4. Empty the water into the water tank and remove the vacuum tube.
5. Remove the bucket from the holder and use a special tool to open the side cover of the water tank.
6. Scrape off the insulation layer under the outer shell to expose the inner tank (most of them on the market are made of stainless steel, but there are other materials as well).
7. Rweld the damaged part of the inner tank, fill it with insulating material (special foaming agent is required) after cooling, cover the side cover and attach the water tank to the bracket. Insert the vacuum tube, add water and you're done.
8. Try to choose the time to go on the water early in the morning the next day. (Repairing the water tank takes a long time, and the time after repair is during the day when there is enough sunlight. Filling the water immediately will easily cause the vacuum tube to burst. )
Solar water leakage is mainly caused by the water storage barrel. The problem is solved, and when water leaks in this part, it can be divided into two situations. First, the common position of the vacuum tube and the vacuum tube. barrel leaks. The solution is very simple, just use a sealing ring to seal it.
LThe cannon is leaking. After encountering this problem, it is relatively complicated to resolve. Most solar water storage barrels have a double-layer structure. The inner layer is for water storage and the outer layer is for insulation. Foam technology is used between the two layers to achieve the insulation effect. During the maintenance process, insulation will inevitably be used. damaged. The foam is destroyed, and because the barrel wall is relatively thin, problems are likely to arise during the welding process. During the maintenance process, maintenance workers must have strong welding abilities.
After completing the relevant construction, the insulation material should be filled again, and replacing the barrel is the best way to solve the problem. If possible, replacing solar energy is also one of the best solutions afterhaving encountered such problems.