The peak height of 6 meters span of the tiled house: Assuming the slope is 30 degrees, then it is an isosceles triangleof 30 degrees. The calculated ridge height is 1.934 meters. hence the color The steel house has a span of 6 meters and a crest height of 1.934 meters.
The area of each slope of the ridge of the tiled house bay is added to obtain the total area. If there is a ridge in the middle of the two slopes, it is. half the span of the house a and the height of the ridge b. To find the slope length of each slope, use the Pythagorean theorem a+b=c Multiply the length of the slope by the length of the house, then multiply it by 2 to get the area.
There are generally two types of roofs: one is flat, the roof is waterproofed, and the top is paved with asphalt, cement, etc. One is an uneven house with a pointed roof, whichis an umbrella house! Typically the tiles are hung on the sloping roof, which is less likely to leak and can also provide thermal insulation!
If you are buying a bungalow and the sloping roof is not the top floor, the impact should not be great. There are several points to understand:
1. Regardless of the floor, when you need to install a solar water heater, you need to understand the condition of the roof of the house you are purchasing. Since flat-roofed homes have flat-roof solar water heaters, those with ridges must install roof-mounted solar water heaters. If you don't understand the situation, there will be installation difficulties.
2. When purchasing a home, you should pay attention to and understand the payment and use of real estate funds, roof repairs and sewer unblocking, and other fee regulations. BecauseNo matter which floor you buy, if the roof leaks or the sewers are clogged, all residents of the unit will have to share the costs.
3. The top floor of a flat-roofed building is relatively hot in summer because the roof is the roof and has poor thermal insulation. There are two situations for the top ridge floor. The first is that there is a loft, and the loft is also for sale. In this way, the attic will be very hot in summer, and the situation is the same as that of the top floor of a flat-roofed building. The other option is to buy a penthouse and get a loft for free. The loft is not sold separately. In this case, the attic is usually a layer of thermal insulation, a rudimentary house, without water or electricity, and usually no one can live there.
I am engaged in solar energy design. Make sure you don't drill any holes. If you do this, water leaks will definitely occurin the future. 3 to 5 years. I absolutely have to change it. The water pressure of 15 meters is absolutely powerful. It's super refreshing to take a shower. You should fill a bucket with about 1 bucket of cold water before taking a shower. . You can wash your clothes after taking a shower. Finally, there is a triangular peaked roof. If solar power can ride on the ridge, it is best to have the front and back 4 legs cemented and secured to the roof. , you can use No. 4 channel steel or No. 8 angle steel because installation masters can do it, but the cost will be higher. Lean it onto the roof and the solar legs will be welded to the channel steel. .