The solar water heater is a device that uses solar heat to heat water. Since solar water heaters have become one of the commonly used appliances in households, repairing solar water heater pipes has become one of the skills that many people need to know. Below we will explain how to repair solar water heater water pipes.
1. Check the fault point: Firstly, find the root cause of the problem, confirm where the accident occurred in the water pipe and what is the cause of the problem. If a water line breaks and water gushes out, the line needs to be replaced.
2. Disassembly of water pipes: Depending on the specific situation, it may be necessary to disassemble the entire solar water heater, or only partial water pipes need to be replaced, so disassembly should be carried out according to the current situation.
3. RefillClear the water pipe: After finding the fault point, remove the original water pipe and replace it with a new one. When replacing, make sure the water pipe is tightly connected to the solar water heater and use professional tools to fix the water pipe.
4. Interface sealing: After replacing the water pipe, use professional sealant to seal the interface to ensure that the water pipe is sealed everywhere.
5. Test operation: After completing the water pipe replacement, be sure to carry out a test operation to check for leaks, water seepage, etc.
Note: When repairing the water pipes of the solar water heater, always pay attention to safety issues, such as ensuring good ventilation in the operating environment to avoid fire and other accidents during operation. Wear glovesprotection and other tools during operation to avoid hand injuries. At the same time, before operation, the water of the solar water heater should be drained to prevent the flow of water from disturbing the operation.
In short, if you want to repair the water pipe of the solar water heater, you must have certain technical operation capabilities, pay attention to safety issues, and be careful when using to solve the problem smoothly. If your maintenance skills are insufficient, it is recommended to hire professional maintenance personnel to carry out the operation.
How to replace old solar water lines with current water lines
You can replace them yourself. Purchase special solar hot water pipes that can withstand high temperatures. Do not use PPR pipes. the pipes measure 60 It is faeasy to deform when the temperature is higher than ℃, but it is better to contact after-sales service. After all, the warranty is one year after the repair. If you replace it yourself, it is not within the warranty period. . And if you don't fix it yourself, your money is wasted.
The thick black water pipes for solar water supply and sanitation are broken. How to repair or replace them?
The method is very simple:
1. First drain the water from the solar water heater.
2. There is a rubber ring at the connection between the vacuum tube and the water tank. If it is very tight, soften it with hot water first, then open a small space and pour. in the detergent. Then buckle the rubber ring and remove the tube. It can be removed.
3. Determine the length and diameter of the original pipe and go to a sola energy storeire to purchase a pipe meeting the same specifications.
4. First put the rubber ring on the pipe, apply detergent to the pipe mouth, insert the pipe mouth into the water tank, then put the pipe head on the bracket base, fix the rubber ring, and replace it well.
You are talking about the black insulated pipe on the outside of the water line. If it's broken, it won't leak. But for the insulated pipe, the damaged area is usually just repaired and bandaged. If it has been used for many years and has cracks from aging, replace it as a whole. Methods such as: removing the water line, using a new glove, then bandaging it.