Be careful when disassembling the Xinxiang solar water heater. Here are the specific steps.
Step 1: First remove all water lines and power cords from the water heater. Be sure to turn off the power supply to avoid any risk of electric shock.
Step 2: Remove the solar collector bracket. The support is very important because it supports the entire solar collector system. The bracket and solar collector are usually attached with screws, so you need to use a wrench or electric wrench to remove it.
Step 3: Disassemble the solar collector. Solar collectors are usually mounted on brackets, so before disassembly, you need to use an electric wrench or wrench to remove the screws and remove the solar collector one by one.
Step 4: Remove the water tank. The water tank of the solar water heater is usually installed on the roof and must be removed using a power wrenchric or key and placed in a suitable location.
Step 5: Disassemble the pipeline. Carefully remove the connections between the pipes and the solar water heater. If necessary, use a wrench or pliers to facilitate removal.
Step 6: Arrange the disassembled parts. The disassembled parts of the solar water heater should be sorted and sorted into categories.
In short, disassembly of the Xinxiang solar water heater requires patience and caution, so as not to damage the parts for further use or recycling. The dismantled solar water heater can be sent to the relevant recycling sites or recycled by other channels.
The steps to disassemble the indoor solar water heater are as follows:
1. Turn off the electrical power or close the natural gas valve.
2. Empty the water from the water tank. Attach one hose to the drain valve at the bottom of the water tank, then insert the other exend of the hose into the sink or bucket, open the drain valve and drain the water from the tank.
3. Remove the hoses from the water tank. Remove the straight and corrugated pipes from the tank.
4. Remove the transition hose on the water tank. Unlock the adapter tube and bend the transition tube, then remove the protruding clamp nut.
5. Remove the bracket and flange. Loosen the bracket and flange nuts and remove them.
6. Remove the protective cover on top of the water heater. Use a wrench to loosen the screws of the protective cover, then remove the protective cover.
7. Remove the pipes from the water heater. Remove the nuts from the water heater connections and other connected pipes.
8. Remove the protective cover at the bottom of the water heater. Loosen the screws of the protective cover and remove the protective cover.
9. Remove the water heater. Loosen the water heater nutsand remove the water heater.
Here are the steps for dismantling an indoor solar water heater. It should be noted that during the disassembly process, you must handle it carefully to avoid damage to the water heater. If you are unsure of your disassembly abilities, it is best to ask a professional to carry out the disassembly operation.