The steps for setting up the automatic water supply of the solar meter are as follows:
1. Press and hold the "setting button", the number "1". will appear in the temperature display area, which means after 1 hour, it will automatically refill the water and it will automatically refill the water at a scheduled time.
2. After setting the automatic water supply for a few hours, you can adjust the water levels such as 50%, 80% and 100%. The water level box will flash to indicate successful adjustment. . You can set the water level to the level you want it to fill automatically.
3. Unplug the power and plug it back in to restore original factory settings. The original factory setting is to fill the water at irregular intervals, and when the water level is lower than 25%, it will automatically fill the water to 100%.
1. TFirst, you need to determine if you have set up automatic water refill. If it is automatic water filling, it will definitely display the water filling status;
It is recommended to take emergency measures first and to close it. For the main water source, it is also recommended to install a manual ball valve device on the water supply pipeline for ease of maintenance.
2. If you have not set automatic water filling, but have set manual water filling, but the water is not filled and it still shows water full , this is due to a failure of the Water Level Sensor Probe. You just need to replace it, it is recommended to find a repairer or buyer.
Detailed information:
Automatic heater water shut-off device solar water
A new type of automatic water shut-off device relates to a device which can realize the purpose of automatically shutting off the water when the water in the water tank is full, especially a device which automatically shuts off the water water when the water in the water tank is full.
Reference materials: