You can use a fully automatic solar cell string welding machine
The box mechanism will hold the first cell and send it to the left suction cup of the translation mechanism
p>
p>Positioning table --Preliminary positioning
Precise positioning and appearance inspection
Laying position - lay the solder strips and battery sheets
Welding-- Install the battery Sheet metal and solder are integrated into one.
Wire cutter
Cutting suction cup set
Wire turning box
Camera inspection
If the solar cell ribbon is copper, it can be soldered with an electric soldering iron . It is best to scrape off the soldering points with a wallpaper knife before soldering (use a broken knife). hacksaw blade to scrape for best results), with rosin, tin the solder points first (manger tin), then tin the ends of the wires. The soldering iron used should not be less than 50 watts or more. You can decide the power accordingly. the situation. Anyway, it won't work if the power is low.