Sangle solar water heater is a relatively common solar water heater on the market, but some defects may still occur during use. Here are some common faults and solutions.
1. The water temperature is too low or not hot.
This problem is generally caused by the following reasons:
(1) The weather is cloudy and rainy, and the solar panels are affected and cannot fully receive solar energy .
(2) Solar panels accumulate dust or are frozen, preventing the absorption of solar energy.
(3) Damage in the water tank, causing the water temperature to be too low.
Solution:
(1) When the weather is bad, you can use the electric auxiliary heating function.
(2) Clean solar panels regularly to ensure they can fully receive solar energy.
(3) Replace damaged ones.
2. The water temperature is too high.
Common reasons are:
(1) The water tank thermostat is faulty.
(2) The thermostat is incorrectly adjusted.
Solution:
(1) Replace the defective thermostat.
(2) Adjust the appropriate water temperature.
3. Insufficient water pressure or low water flow.
Possible reasons for this situation are:
(1) The water pipe is blocked or leaking.
(2) Water pump or water valve failure.
Solution:
(1) Clean or replace clogged or leaking water lines.
(2) Replace the defective water pump or water valve.
4. Water flows.
The cause of a water leak may be a problem with the safety valve or other parts in the water tank, and the damaged parts need to be replaced.
In short, the use of solar water heaters is a relatively new, eco-friendly waynenvironmental and energy efficient, to collect water. When used correctly, its failure rate is relatively low and its maintenance is very simple. However, if you encounter the above fault conditions and cannot solve the problem by yourself, it is recommended to contact professional technicians for maintenance in time.