There is no response when inserting the ETC card. The ETC card may be inserted in the wrong direction or the device may be turned off.
1. ETC Card Direction: Under normal circumstances, the ETC card is inserted into the device with the front facing the driver and the rear facing the windshield. Once the insertion is successful, the account balance will be displayed. appear on the screen; If there is no display, you can turn the ETC card over and reinsert it;
2. The device is powered off: If the ETC card is not inserted upside down, you can try pressing the button on the top of the ETC. If there is no response, the device is turned off. If the ETC uses solar cells, simply drive the car into the sun and let the solar charging panel charge. a charging cable for charging.
How to use etc
1. The installation height of ETC equipment must notnot be less than 1.2 meters and not more than 2.5 meters.
2. The installation angle N should be between 30° and 90° (the angle between the surface of the electronic label and the horizontal plane).
3. The installation position of OBU equipment for small vehicles such as cars and vans is in the middle and upper part of the windshield level, while the installation position for large vehicles such as large trucks and buses is in middle and lower part.