It is necessary to use a fully automatic water supply device without tower
1. Principle, composition, work process and application
1.
Principle: Fully automatic water supply without tower Water supply is air pressure water supply.
Composition: The fully automatic tower-free water supply consists of a tower-free water supply device (pressure tank; ), pressure switch, pressure gauge, water pump, pipeline network and support equipment. The valve is composed of two parts: pipeline and circuit
Fully automatic tower-free water supply
1. composition, working process and application 1. Principle: Fully automatic tower-free water supply is pneumatic water supply
2. Composition: The fully automatic tower-free water supply consists of a dispositive water supply without tower (pressure tank), a pressure switch, pressure gauge, water pump, pipeline network and support valves, divided into two parts: pipeline and circuit. Part
3. Working process: There is uniform normal pressure air in the non-tower water supply device (pressure tank). ). After installing
a pressure switch, a pressure gauge and a network of pipes, it becomes a sealed container. The water pump starts, the water level in the tank rises, and the air in the tank is compressed, creating air pressure. When the air pressure reaches the set pressure (e.g. 0.28 MPa), the water pump stops working. Due to the air pressure, the water in the tank can flow out at high speed. Once the water level in the tank drops, the air pressure decreases and reaches the set pressure (e.g. 0.14 MPa), and the water pump rstarts automatically, starting again and again, circulating automatically. Its essence is a little domestic tap water. system.