Solar water heater exhaust port 60mm. The exhaust pipe of most forced exhaust water heaters on the market is generally 60mm, and the forced exhaust type has a casing with an outer diameter of 90mm. Solar water heater is a heating device that converts solar energy into thermal energy, heating water from low temperature to high temperature to meet people's use of hot water in life and production . Solar water heaters are divided into vacuum tube solar water heaters and flat panel solar water heaters based on their structural shapes. Evacuated tube solar water heaters are mainly used, accounting for 95% of the domestic market share.
How to exhaust flat panel solar without circulating fluid port?
Tianpu Solar's exhaust hole is at the bottom. According to relevant public information requests: The tror solar exhaust is a hole that needs to be installed in the vacuum tube solar water heater. Since the solar water heater is not a pressurized water tank, when the solar water heater is filled with water, there is pressure and the pressure is vented from the exhaust hole to protect the inner tank of the water tank of the swelling.
1. First find the drain hole of the solar water heater: Flat panel solar water heaters usually have a top drain hole, located on the top or side of the water heater. You can confirm the specific location of the vent by checking the water heater's manual or asking the manufacturer.
2. Then close the water inlet valve: Before draining, you should close the water inlet valve of the solar water heater to prevent water from flowing out.
3. Open the exhaust hole: Use a tool to open the exhaust hole so that air canbe evacuated gently.
4. Final Exhaust: Gently tap the solar water heater pipes with your hands to help the air escape. Be careful not to use excessive force to avoid damaging the water heater.