The solar water heater consists of a hot water tank (hot water tank) and a collector. The system is equipped with an automatic exhaust valve at the highest point.
If the water flow continues, it means that the water supply switch below is not not turned off, it may be that the solenoid valve is not closed well or the sensor is malfunctioning and the water level is full but still shows dissatisfaction. If water only flows when the temperature is high, the sensor may be set too high. Once the water is heated, the volume expands and overflows the overflow port or exhaust port. If the water only flows occasionally. that your outside temperature is too low and hot air meets it. When the air conditioner condenses outside, don't worry.
The solar water flows by itself and the pressure is too low. If hot water production is low, itThis is a problem of lack of solar energy. First, add a booster pump and use it. a small booster pump. It would also be better to press the nozzle. If it is more than two years old, first check if it is caused by scale in the shower head (nozzle). You can unscrew the shower head and see if the water volume is still low. This may be due to excess scale in the shower head. water mixer. Another reason is that there is scale on the water outlet of the water storage barrel.
Solutions to the problem of too low water flow from the solar water heater:
1. Replace the pipes and increase the diameter of the pipes.
2. Add a miniature booster pump to the water outlet of the solar water heater.
3. There is now a supercharged shower that does not have electrical supercharging. As long as the cold water flows normally, it can flow hot water after use, itthere will be at least 3 times more. hot water than before use, and it can also prevent hot and cold, anti-scalding, anti-limescale, thermostatic valve is omitted.
4. It would be better to add a booster pump and use a small booster nozzle.