How to disassemble the heating pipe of the solar water heater:
1. First of all, it is better to choose a cloudy day, morning or evening, because you need to remove the heating pipe from the solar water heater first before disassembling it. Drain all the hot water to avoid being burned by hot water seeping in when removing the hose. If it is noon at this time, since the water in the vacuum tube has emitted light, the strong sunlight will damage the vacuum tube and shorten its service life.
2. When disassembling, it is best to use water soaked in detergent or washing powder to lubricate the vacuum tube. At the same time, pay attention to the angle of the vacuum tube and avoid it. pull the angle to prevent the vacuum tube from bursting. After disassembly, the vacuum tube must be packed in special polyester foam compartments and placed in special cartons to avoid shock during transportation.
3. UsesUse water soaked in detergent or laundry detergent to lubricate the connection between the vacuum tube and the water tank, then turn it left and right and push it in lightly, then remove the other end of the Remove the vacuum tube of the circlip. Carefully remove the vacuum tube from the tank.
Detailed information:
Solar water heater leak repair
1. Water tank leak
Solar insulation Water leaks are relatively rare. If upon inspection it is found that the water tank liner is indeed leaking, then you should consider replacing the solar water tank. The quality and age of the water tank coating directly causes the water tank to rust and leak. But in general, the solar seal ring is usually damaged. In this case, just ask the master to come and replace a few silicone solar rings.
2. Leaking water pipe
If the water pipe is leaking or the water pipe is leaking, it is because the PPR water pipe or aluminum-plastic pipe has aged after years of wind. and exposure to the sun. This situation It is necessary to replace the solar hot water pipe. A valve leak means a valve failure. In this case, a new solar valve or solenoid valve must be replaced.
3. The solar heating pipe is leaking
If the solar heating pipe is leaking from the electric heater position, it means that the electric heater is rusty and damaged, and a new seal or the electric heating rod must be replaced. Water leakage of the solar vacuum tube is basically caused by the aging of the solar silicone ring, and the vacuum tube needs to be removed and replaced with a new silicone ring. Water leaks from the solar exhaust outlet are usually caused by cdamaged adapters or meters. In this case, the water temperature and level meter or a new solar meter must be replaced.
References:
How to disassemble and assemble the solar water heater
If the whole thing needs to be disassembled, first drain the water into water tank, remove the upper and lower water pipes and the external pipe, then remove the tube and finally remove the bracket. This is basically the best way. If you encounter a tube that is difficult to remove, first remove the beam that holds the tube support underneath. Use the tube under the tube first, and then remove it one by one.
When disassembling and assembling the solar water heater, you should pay attention to the following points: 1. Turn off the water source and power supply: Before disassembly and assembly, you must turn offdre the water source and power supply of the solar water heater to avoid accidents. 2. Drain the water: Before disassembly and assembly, the water of the solar water heater should be drained to prevent water from flowing out during disassembly. 3. Disassemble the pipes: When disassembling the solar water heater, you must first disassemble the pipes and remove the water pipes and wires. 4. Disassemble the bracket: When disassembling the solar water heater, you must first disassemble the bracket and remove the solar water heater from the bracket. 5. Disassemble the solar collector: If you need to disassemble the solar collector, you must first remove the sensor screws and remove the sensor from the solar water heater. 6. Installation: Once disassembly is completed, the solar water heater needs to be reinstalled. Just follow the reverse steps. It should be noted that safety should be considered during the disassembly and installation process to avoid accidents.If you are unsure of the operation method, it is recommended to hire professionals for disassembly and assembly.