Photovoltaic panel installation process:
1. Site selection
The sun must be able to shine all year round (for example, on the roof of a building).
2. Making the foundation
After determining the azimuth angle according to the geographical location, combine the shape of the photovoltaic module support to make the support foundation (such as a concrete base). .
3. Install the bracket
Install and secure the bracket to the foundation, and adjust the azimuth and elevation angles.
4. Install the photovoltaic modules
Install and fix the silicon crystal solar panels to the support according to the pre-designed plan.
5. Electrical connection
Firstly, the electrical grounding of the bracket and photovoltaic modules should be carried out, and then the wiring of each silicon crystal solar panel should be connected according to the design.
6. Debugginge electrical
After the wiring of the silicon crystal solar panels is connected and checked, connect the inverter, battery and other equipment for common debugging.
Precautions for installing photovoltaic solar panels
1. Do not install photovoltaic solar panels in shady places such as trees and buildings. Do not approach open flames or flammable materials. The assembly structure must be able to adapt to environmental requirements. Please choose appropriate materials and anti-corrosion treatments. Use reliable methods to install components. If components fall from a high altitude, they may cause damage or jeopardize the safety of people and property. Do not disassemble, bend or hit components with hard objects. Avoid walking on components.
2. Use spring washers and flat washerses to attach the photovoltaic solar panels to the support. Ground the panel assembly appropriately based on the site environment and the structural condition of the mounting bracket.
Wall-mounted solar panels are an efficient way to generate electricity, especially for those without adequate roof space. Here are the steps and precautions for installing solar panels on the wall.
Steps:
1. Choose suitable solar panels: When selecting solar panels, you should consider the surface area and angle of the wall to ensure that it can fully absorb sunlight and generate electricity. . Generally speaking, the wall angle should be between 20 and 45 degrees, and the solar panel model should also be selected according to this angle.
2. Choose the appropriate installation location: You must choose the locationclosest to the electrical network for the installation in order to facilitate the return of electricity to the network.
3. Prepare installation tools and materials: some necessary tools, such as skateboard nails, oxidized steel screws, etc., and necessary installation materials, such as aluminum mounting brackets, boxes of junction, etc. prepared.
4. Mounting Bracket: The mounting bracket must be installed in a pre-selected location on the wall. Make sure the mounting bracket is parallel to the wall and secure.
5. Install the solar panel: Install the solar panel on the bracket and use steel screws to fix the solar panel to the bracket to prevent it from moving under strong wind pressure.
6. Complete the electrical connection: You can use a junction box to connect the solar panel to the electrical system. Connect them and ensure high wiring.te quality to avoid damaging the panel.
Notes:
1. Before selecting solar panels, you should measure the wall angle and space to ensure that you select the appropriate solar panel size.
2. Before installing solar panels, make sure the wall is dry, flat and solid to ensure the mounting bracket is secure.
3. When handling electrical connections, precautions should be taken and safety fuses and cables should be used according to the actual situation.
4. Wall-mounted solar panels are only suitable for walls with solid structures such as brick walls, steel structures and cement walls, and installation should always be carried out in accordance with the design guidelines.