1. The vent hole of the solar water tank on the roof is blocked. You need to clean out the debris and clean the air holes completely. One is the water tank vent hole (some old ones don't have this vent). hole), and the other is ventilation holes on the upper side of the tank.
2. The nozzle has softened, aged, expanded and twisted, blocking the water line, causing poor water flow. The nozzle hose must be replaced with a new one.
3. The water pipe elbow connecting the water tank to the indoor water valve is too large, causing the water pipe to collapse and poor water flow.
The solar nozzle is still blocked and the water flow is too low. Anyone know how to fix it
Status. Solar water heaters are divided into vacuum tube solar water heaters and flat panel solar water heaters based on their structural shapes. The water pressure of this itemkey installed on the roof can go down smoothly and reach a distance of two meters, so the water from the shower head installed by this item is normal. Solar energy mainly relies on evacuated tube solar water heaters, which account for 95% of the domestic market share.
The solar nozzle does not produce water, and the water flows along the pipe connecting the nozzle.
1. If it's just the nozzle that's blocked. It may be because the local water quality is too hard, so you can regularly soak the nozzle with white vinegar.
2 If pipelines and interfaces are blocked. Pipes should be cleaned regularly. or larger tubes.
3 The size of the water flow depends on the height difference between the water tank and the water outlet. This problem can only be solved by adding a booster pump.
Your nozzle may be clogged with scale after use.prolonged ion. You can open the nozzle and clean it, or soak it in vinegar. Water connecting the nozzle may be due to this. aging of the silicone seal. It is recommended to replace it. If you want to replace a new shower head, it is recommended to use one that automatically cleans scale.