Wrap with transparent tape so that it does not evaporate.
Solar insulation is usually made of several layers of materials, including polyethylene foam, aluminum foil and other materials. These materials can effectively maintain indoor temperature, thereby reducing energy consumption. However, if these materials are soaked in water, they lose their insulating effect because water is a good conductor of heat.
The function of transparent tape is to glue two objects together. It is usually made of polymers and glue. When a transparent tape is wrapped around the thermal insulation material, it prevents further penetration into the material.
However, transparent tape cannot make solar insulation materials dry. Instead, it prevents moisture from evaporating because it prevents moisture from escaping through surface poresof the material. If the solar insulation is completely soaked, it is best to let it dry. If desired, air drying or a heater can be used to speed drying.
This will have an impact. If there is tape on it, it will definitely have different levels of influence. Firstly, the tape will change color or even turn black after being exposed to wind, rain and sunlight for a while, which will be annoying. Secondly, the transparency of the tape is not very good, if it is lower than the ideal state, the light will also become dim.