There is a process from lighting the gas water heater to producing hot water. During this period, the water temperature in the water heater changes from cold to hot water. “Zero cold water” actually means that no water comes out after ignition, and the water can circulate through the water heater first, then exit once it is hot. In fact, when a water heater is used, there will be a cold water section in the hot water pipe. This problem cannot be solved by the water heater. Therefore, using a “zero cold water” water heater actually only reduces the time it takes to release cold water by a few seconds.
Why can't Midea Zero cold water be heated in seconds?
Set according to time.
Press the time setting button to enter the minute setting for the Midea zero cold water cycle, then press the up buttonsand down to set the minutes. Once the adjustment is complete, reinstall it. time button and the time setting is completed.
Jog circulation can be understood as the manual circulation of cold water in the pipeline, that is, starting the cold water circulation pump, and the circulation does not will stop until you have finished jogging.
The reason why Midea Zero cold water cannot be heated in seconds is because the heating sensor wire is damaged. After prolonged use of the water heater, the internal sensing wires will be damaged and therefore cannot be heated. It's also possible that the switch or wire is disconnected, making the circuit unstable. the water in the water heater is not hot. If the water heater is used for a long time, the interior is not cleaned in time, resulting in a large amount of dirt preventing heatingwater to heat.
Midea Zero Cold Water Gas Water Heater Features
The Zero Cold Water Gas Water Heater is also a type of gas water heater. gas, but it is different from ordinary gas water heater. water as it contains The built-in circulation pump allows hot water to circulate quickly through the built-in circulation pump. Even a single water pipe can also achieve the same instant hot water effect.
When using a cold water gas water heater, many people will wonder if it is necessary to install a pressure booster pump. Here I want to tell you that unless the water pressure at home is insufficient, there is none. Yes, hot water can circulate quickly and directly through the circulation pump built into the water heater without any hassle.