When using a gas water heater, you must close the solar valve.
Under normal circumstances, solar and gas water heaters lead to a hot water pipe; If you do not close valve 1 when using a gas water heater, the tap water pressure will be high and it will push the solar energy through the hot water pipe, and the solar water will leak when it will be full, so you need to close the solar valve when using a gas water heater.
You must design and lay out your hot and cold water and natural gas pipes in advance. Gas water heaters are regulated and cannot be installed in the bathroom, so it is best to install them on the bathroom wall. kitchen (adjacent to the bathroom). When using hot water, you just need to turn off the hot water tap and the water heater will automatically turn off and stop working. Madison Fangfang. Could it be that the sensor is broken? Let me roughly analyze what you want to express. The solar overflow port will leak. When using a solar water heater, the reason is very simple: there is no sun. Your question is not clear. The pipe of the solar water heater is aligned with the hot water pipes of the gas water heater are connected, so you need to close the inlet valve or outlet valve of the gas water heater, this is i.e. the gas water inlet valve. The water heater is not closed. You can only choose to use one of the two. If it is not closed, you will use hot water from the water heater.
Solar energy and natural gas are used together. If the solar water is not full, it will not affect the natural gas.
Installing a gas water heater has nothing to do with cold water pipes. You can either share a driving ecold with a solar water heater, or install a separate cold water pipe.
The key is that you need to add a transfer switch at the connection between the hot water supply pipes from the solar water heater and the gas water heater. When using the solar water heater, open the solar water heater. valve of the hot water pipe and close the valve of the gas water heater;
p>
When using a gas water heater, close the valve of the hot water pipe hot water supply to the solar water heater and open the valve of the gas water heater. .
The prerequisite for starting the gas water heater is the power of the water flow when the hot water tap is opened. If the hot water tap supplying the shower is turned off, the gas water heater will not start without the power of the water flow, so there is no impact.