When the solar water heater display is broken, you can solve the problem according to the following four aspects:
1. Check the power supply and connection: Firstly, make sure the power connection of the solar water heater is normal. Check the plug and power cord for damage or damage. If you encounter a problem, try reconnecting, unplugging, or replacing the power cord. Make sure all electrical connections are tight and secure, which can help troubleshoot monitor issues.
2. Restart the system: Sometimes the solar water heater display problems may be caused by a temporary software glitch. Try to resolve the problem by restarting the system. Turn off the power to the solar water heater and wait a few minutes before turning it back on. This will clear temporary errors from your system and potentially resolvemonitor problems.
3. Check the monitor connection: Make sure the monitor connection of the solar water heater is correct. Check if the connection cable between the monitor and the system host is loose or damaged. If necessary, reconnect and unplug the cable and make sure the connection is secure. If the monitor is powered by a battery, verify that the battery is installed correctly and has sufficient power.
4. Contact professional maintenance personnel: If the problem is not solved after the above steps, or you don't know how to solve it, it is best to contact professional maintenance personnel of the solar water heater for inspection and repair. They have relevant professional knowledge and experience and can more accurately determine the problem and offer effective solutions.
Remember that there are certain risksues associated with equipment related to electricity and water. If you are unfamiliar with the repair process or unsure of your abilities, please avoid disassembling or repairing the equipment yourself to avoid causing further problems. damage or a safety risk.