I don't know if you are using stand-alone or technical solar equipment. Basically, during the current season, if the weather is good and the solar water temperature still seems low, first check the insulation of the solar water tank and pipes. Some solar installations today do not carefully insulate pipes, including joints, holes in walls and other places. If insulation is not carried out, thermal bridges will form in these places and the heat will dissipate quickly. Additionally, you can check the insulation condition of the solar water tank to see if there are any cracks. If there are cracks, check whether the insulation material inside is intact. In some solar water tanks, the surrounding insulating material foams unevenly. the upper and lower bottom surfaces of the cylindrical water tank are almost empty. Yes, in the current season, the heat absorbed by thesun is quickly lost. If there are no issues with the links above, that means the manifold is too small and you should consider an extension.
Why does the solar monitor show high temperature but low water temperature?
The problem is caused by too high cold water pressure and low water pressure. hot water too low. Solution: 1: Every time you take a bath, if this happens, increase the hot water valve and adjust the direction of the cold water valve. 2: The best solution: Install a cold water tower on the roof of the building, and it. cold water during solar bathing will be generated by Supplying water from the cold water tank on the roof can solve the problem of hot and cold caused by the large water pressure difference....< /p>
Assuming that the meter display is correct, then the solar water temperature should be consistent with the display. S'there is a big difference, it may be that for some reason the water you boil is not the water in solar water. tank, so the temperatures are different. You can directly disconnect the water outlet pipe at the bottom of the solar water tank to confirm the true solar water temperature.
If the actual water temperature is actually different from that displayed. degree, it means the meter or temperature sensor is faulty, causing poor display
I hope to adopt it, thank you