Solar panel functions

Photovoltaic structural components (commonly known as solar panels) are made from solar cells (two specifications of the whole part: 125*125mm, 156*156mm, 124*124mm, etc.) or by a laser cutting machine. or steel wire cutting machine Cut solar cells of different specifications are combined to form. Since the current and voltage of a single solar cell are very low, we first connect them in series to get high voltage, then connect them in parallel to get high current, then pass them through a diode (to avoid current flow back), then exit. And encapsulate them on a stainless steel, aluminum or other non-metallic frame, install the top glass and back panel, fill with nitrogen and seal. The assembly is called a component, which is a photovoltaic structural component or solar cell component. Solar cellsSimple ones cannot be used directly as energy sources. To realize a power supply, several individual cells must be connected in series, in parallel and tightly sealed within the components. Photovoltaic structural components (also called solar panels) are the core part of the solar power generation system and the most important part of the solar power generation system. Its function is to convert solar energy into electrical energy, or send it to the battery for storage, or to promote work under load. Through the use of microinverters, the current source of photovoltaic structural components can be directly converted into a voltage source of approximately 40 V, which can be used to drive electrical appliances in daily life.