As people become more and more aware of environmental protection, solar energy as a renewable energy source is receiving more and more attention. As the main component of solar water heaters, solar vacuum tubes are even more popular. It uses vacuum tube technology to achieve efficient energy conversion and has become an energy saving tool.
What is a solar vacuum tube?
Solar vacuum tube is the main component of solar water heater, composed of glass tube, heat absorption tube, bracket, etc. Among them, the heat absorbing tube is the core component of the solar vacuum tube. It consists of two layers of glass tubes, inside and outside, with a vacuum layer in the middle. Inside the heat absorbing tube is a copper tube coated with a heat absorbing coating that converts energye solar into thermal energy. The upper and lower ends of the heat absorbing tube are connected to the water tank, and the heat energy is transferred by water circulation.
Advantages of solar vacuum tubes
Solar vacuum tubes have the following advantages:
1. Efficient Energy Conversion: Solar vacuum tubes use vacuum tube technology to achieve efficient output. energy conversion, which can convert solar energy into thermal energy, thereby heating water.
2. Energy saving and environmental protection: Solar vacuum tubes use solar energy as energy, do not require additional power consumption, are energy saving and environmentally friendly.
3. Simple maintenance: Solar vacuum tubes have no mechanical parts, simple maintenance and long service life.
How to use solar vacuum tubes
Lors of using solar vacuum tubes, you should pay attention to the following points:
1 Installation location: Solar vacuum tube. The tubes should be installed in a sunny, south-facing location.
2. How to use: First fill the water into the water tank, then turn on the water pump to circulate the water. When the solar vacuum tube absorbs solar energy, it heats the water, and the heated water automatically rises into the water tank for people to use.
3. Maintenance: Regularly check whether the solar vacuum tube is damaged or leaking, and replace or repair it in time.
Can aluminum-plastic pipes be used for solar water heater installation?
Solar tubes. This plastic pipe is called solar pipe. It is a composite material structure composed of thermosetting resin and specially manufactured metal materials.ues. It has the characteristics of wear resistance, temperature resistance, corrosion resistance, impact resistance, low thermal conductivity, etc. mainly used in the field of solar power generation engineering. Solar energy refers to the natural energy of the sun. It is an important resource for maintaining the earth's ecosystem and can be used to produce electricity, heat and light energy.
Yes.
From an installation point of view. Aluminum-plastic pipes are more convenient to install. The inner diameter of aluminum-plastic pipes is small. Generally, solar energy is installed using 1216. During use, there is less cold water and more hot water.
It is easy to maintain and does not require professional tools.
ppr typically uses 20 and requires professional tools toon its installation. Aluminum-plastic pipes are tight, so there is a greater chance of loosening and leaking during use. The PPR is welded and there are virtually no leaks. In terms of cost of use, high-quality aluminum-plastic pipes are much more expensive than PPR.
In terms of service life, the service life of high-quality aluminum-plastic pipes can completely guarantee that there will be no problems at the end of the life of the heater solar water. However, the products on the market are now mixed, and the prices of many pipes are very low, so the quality is naturally not guaranteed, not only aluminum-plastic pipes but also ppr.