To clean the solar water heater, you need to remove the hose, drain the water and then rinse.
1. When cleaning the solar water heater, first slowly remove all the sealing rings, then disassemble the solar tubes one by one. During this step, make sure to wear gloves to avoid scratches. your hands.
2. After removing the hose, you will find that a lot of water will flow out of the hose. Empty the water from the solar pipe.
3. When dismantling solar pipes, especially those that have rusted for a long time, it is more laborious. Be sure to remove them carefully and slowly. force to avoid scratches.
4. After draining the water from the solar pipeline, rinse it with clean water. Because the solar pipeline water consists of sewage and dirt, we need to flush it again with a large amount of clean water. .
5. After rinsing for a while, put a phad some detergent thinner on the top of the solar pipe, then install it into the solar pipe. At this point, simply rinse it with clean water.
Methods to reduce scale in solar water heaters:
1. The hot water in the bucket should be refilled in time after use in summer, which can reduce the temperature of the water in the bucket.
2. Use hot water as much as possible in summer, and then fill it with tap water in time to lower the water temperature in the bucket.
3. Cover the glass tube with a sunscreen net to reduce sun exposure.
4. Install a water temperature gauge to easily check the water temperature and water level in the bucket. Try to keep the water temperature in the bucket below 80 degrees, preferably between 60 and 70 degrees, so that there is no scale.