The mouth is turned downward. The structure of Siji Muge solar hot water barrel can be divided into: vacuum tube collector and insulated hot water storage tank. The internal structure of the overflow port faces downward, side by side with the water inlet of the water tank, then. inserted with a pipe thinner than the water tank interface. In the mouth, the length should not touch the top of the water tank, in this way the overflow and exhaust are resolved and the heat dissipation is small.
On the far left, the green and red lights are on at the same time to prove that the hot water is normal. If there is still air in the pressure relief port, continue to press the water button until there is no more air in the water coming out of the port decompression. Turn on the hot water faucet and the water will flow (the pressure relief port will stop). water). The green and red lights on the outsideThe left side will light up at the same time to prove that the hot water is normal. When you take a shower, if the water in the solar water heater is used up and the person has not rinsed, you can apply cold water for a few minutes and use the principle of cold water flowing and floating hot water to expel the water. hot water into the vacuum tube. Then I took a shower.