Must be placed vertically. The design is to place it vertically so that all aspects can be used normally, it can be used for a long time, it is safe, and the quality can be guaranteed. If it is placed horizontally or diagonally and the normal design is changed, it can be used, but safety cannot be guaranteed.
There are three ways to drain the electric water heater:
1. Close the water inlet faucet, open the water outlet faucet and install the safety valve (installed on the cold water pipe). (inlet with one-way direction indicator) Valve) the handle is raised, this method drains the water slowly.
2. Close the water inlet valve, remove the mixing valve and safety valve and drain the water quickly.
3. Close the water inlet valve, open the water outlet valve and unscrew the waste water outlet nut to release the wateras quickly as possible.
It is recommended to use the second method, as it is easy to use and the layout is cleaner.
To drain the gas water heater, there is a small long handled screw at the bottom, simply unscrew it and drain it.
Box, hot water pipe, solar heat absorber, water pump.
1. Box: One of the main components of the solar water storage barrel, used to store heated water.
2. Hot water pipe: The key part of heat transfer inside the wall-mounted solar water storage barrel is usually made of metal and installed in the water tank.
3. Solar Heat Absorber: Also called solar collector, it is one of the essential components of solar water storage barrel.
4. Water Pump: Responsible for moving water in the hot water pipe from the wall-mounted solar barrel to the water tank, while ensuring smooth and continuous water flowu.