1. First of all, you need to determine if you have configured an automatic water supply. If it is an automatic water supply, the water status will definitely be displayed;
It is recommended to do so. take emergency measures first and turn off the main water source. Additionally, it is recommended to install a manual ball valve device on the water supply pipeline for ease of maintenance.
2. If you have not set automatic water filling, but have set manual water filling, but the water is not filled and it still shows water full , this is due to a failure of the Water Level Sensor Probe. You just need to replace it, it is recommended to find a repairer or a buyer.
Detailed information:
A new type of automatic water shut-off device relates to a device capable of automatically shutting off water when the water tank is full, including a device that automatically shuts off water when the water tank is full.
Reference documents:
The understanding of putting a little water in the pipe to prevent it from freezing n That's not what you said. Adding a little water every day means letting the water flow through the pipe. When you fill it with water, the water in the pipe has already flowed, so there is no need to put more water. Additionally, releasing water every day involves releasing hot or warm water from solar energy to prevent hot water heating pipes from freezing and cracking. You have just filled the water tank.If the water temperature in the water tank is high. will have an effect. If it is weak, it will have no effect. In addition, the night temperature is low, so it is better not to go on the water at night in winter.