The problem of solar scale removal tips can be solved by these methods, which can be selected according to the actual situation. You can drain the water from the solar water heater first, then remove the vacuum tube, pour white vinegar into the tube, soak it for 20 minutes, then clean it with a brush, then rinse it with water. clear water. You can also choose solar descaling agent, open the water inlet of the solar water heater, add the descaling agent into the water tank, then start the heating cycle for 30 minutes, then open the descaling port. drain and empty the water, fill it with water. again and cycle for two minutes. Dry the water, fill it with water again and it is ready to use.
The water heater should be cleaned every 2-3 years. Cleaning too frequently or for an extended period of time will affect the performance of the water heater. Solar water heaters need to be cleaneds every two to three years. External cleaning: The solar water heater should wipe the dust on the surface according to the dirt. Keeping it clean can maintain high heat collection efficiency. When cleaning the interior: open the water inlet of the solar water heater, pour white vinegar into the water storage tank, let the water heater cycle automatically for 20-30 minutes, then open the drain outlet, drain the white vinegar which has cleaned the scale. , then fill the water tank and drain it after the cycle. In daily life, everyone should pay attention when using solar water heaters. When the water temperature in the water tank is below 75 degrees, scale is not easily produced. Therefore, in summer, spring and autumn it depends on weather conditions. If there is enough sunshine, the water in the water tank should be added graduallyand as it is used, so that the water temperature drops as tap water is added to prevent scale generation.