Hello; this cover must be opened, otherwise the air cannot be discharged and it will be difficult to enter the water, and even water cannot be added. Even if water is added, the water will not flow out easily when using hot water. , because the water storage bucket will form a vacuum, if the air cannot enter, the hot water cannot flow out, so there must be holes for the inlet and outlet of the air. I hope this can help you, and I hope you will click to adopt it.
The author only talks about familiar desktop solar power, in view of the limited knowledge of split, wall-mounted and other solar products, I will not show my shame here for fear of making people laugh
The place where solar leakage occurs on the desktop is divided into two parts: one is the main chassis area but also the bathroom area.
Let's talk about the main chassis leak first.
The main chassis leakmain frame is divided into joints inside and outside the bucket.
When you find that your solar panel is leaking, first find where the leak is.
1. The vacuum tube is leaking. First of all, let me explain to you that the general ¢47
¢58 vacuum tube cannot be used in winter. The tube will freeze and crack. When using it in spring and summer, remember that when there is no water in the bucket, you can only fill it with water at night or early in the morning. For newly installed solar cells, the temperature inside the tube rises rapidly at noon. A sudden injection of cold water will rupture the vacuum tube. If the vacuum tube is cracked and leaking, the solution is to close the water supply valve and turn off the automatic water supply. Once the water in the bucket has drained, remove the broken tube. It is recommended to apply lubricant. the vacuum tube and hold it first. YouNose the vacuum tube, insert the vacuum tube into the water tank until the other end of the vacuum tube leaves the bracket, then tilt the broken tube outward. The vacuum tube is broken and needs to be replaced with a new one. To replace the installation method, first place a dust-proof ring (i.e. black leather ring) on the non-tip of the vacuum tube, apply detergent (diluted is enough) on the non-tip, then insert it into the bucket, then remove it to make the tip of the vacuum tube support the plastic holder on the bracket.
2. The vacuum tube does not leak. Water overflows from the hole where the vacuum tube is connected to the water tank. In this case there is a problem with the silicone ring in the barrel and the. the silicone ring is broken.
Then take out the vacuum tube first, touch the silicone ring inside the barrel to see if it has fallen off, if so, take it out and use a knife to rstretch the surrounding insulating material (foam (material), release a little space, about 4mm, then install the silicone ring, do it evenly by hand, then install the vacuum tube so that it does not leak not (If the silicone ring is broken, you can buy another one.) If it still leaks, it means the stainless steel liner is leaking. In this case, go directly to the manufacturer to return it. , and it cannot be repaired by non-professional people 3. The upper exhaust is leaking. When the solar power is filled with water, the normal situation is that the water overflows. and leaks first. If the water supply valve is not closed in time, the water will flow out quickly and the excess water will be discharged from the upper exhaust. , which is normal If the upper exhaust pipe is emptied first, then you can remove the overflow pipe 1-2 cm downwards (overflow pipe).n seamless), or lift the upper exhaust pipe upwards about 1 cm.
4. If the water inlet is installed under the barrel, it may leak. The water outlet is always installed under the barrel. Downward. The two situations can be handled together. First of all, when checking, it is not the joint between the inlet and outlet pipes and the plastic pipe that is leaking. If so, drain the water first. Remove the gasket, wrap a few more layers of raw material tape, then reinstall the gasket. It will stop leaking, replace it with a better quality gasket. If water from the inlet and outlet pipes leaks from the water tank, it can only be returned to the factory for repair.
5. The bucket lid is leaking. The bucket lid usually does not leak, the vacuum tube silicone ring may be broken. material and flows out of the bucket lid. If the silicone ring is not thatssed, replace it within the warranty period.
The above concerns the water leakage problem in the main frame. Let's talk about water leaks in the bathroom.
If the bathroom is leaking, it is a pipe problem. The gasket is leaking and find the problem. Remove it first and wrap it around with some more tape, then install it. If it still leaks, replace the connector. Most hardware stores sell them in thermal equipment stores.