The sealing ring is aging. It is recommended that the user replace the sealing ring.
Check if there is a problem with the water tank. Check the water tank for bulging, deflated, off-center, rusty or damaged. The above conditions may affect the roundness of the nozzle. . Repair or replace the water tank as necessary.
If there are many water leaks, you should consider that the installation angle of the water tank has not been properly adjusted. Check the angle of the water tank and try readjusting the angle of the water tank. It could also be a media tilt issue. Check and readjust the support.
Second, the sealing ring is damaged, causing water leakage. Buy a sealing ring, empty the water into the water tank, then slowly unscrew the tube, replace the sealing ring, insert the tube, then take. take a look at the water anddon’t forget to put the sealing ring in place.
Precautions for solar installation:
After the water heater is installed and fixed, non-professionals should not move or disassemble it easily to avoid damage to key components. . Debris should be put away to eliminate the hidden risk of hitting the vacuum tube. Check the exhaust hole regularly to ensure that it is smooth to avoid inflation or deflation of the water tank.
When cleaning the vacuum tube regularly, be careful not to damage the top of the lower end of the vacuum tube. Solar water heaters equipped with auxiliary electric heating devices must pay special attention to the water supply to avoid dry burning without. water.
When the temperature is not too low (5-7℃), after using water that night, if there is still hot water in the tankir water, it is advisable to immediately fill the solar water heater with water. to reduce the water temperature in the water tank and the heat at night. If the temperature is low, it is advisable to turn on the water tomorrow morning to prevent the pipes from freezing at the outlet of the water heater.
The repair method for leaking solar water inlet seal ring is as follows:
< First, let's check whether the solar water leak is caused by the welding of the water tank. If water leaks from the welding area of the water tank, simply seal the welding area with tape or glue. If the vacuum collector tube is broken, we need to replace the vacuum collector tube at that time. You can replace the broken one.If the sealing ring is leaking, we can find the leaking water nozzle, remove the old silicone ring and replace it with a new one. Wes can check the upper and lower water inlets for leaks. The leakage of the upper and lower water pipes is directly related to a similar direct pipe connection. If a similar direct pipe connection fails, it is necessary to ask professional maintenance personnel to repair it. he.
Principles of solar energy technology
Solar energy is generated by the fusion of hydrogen and helium at inside the sun to release enormous nuclear energy. the sun, a solar energy production system linked to materials Most of the energy needed by humans comes from the sun, directly or indirectly. Plants release oxygen, absorb carbon dioxide and convert solar energy into chemical energy and store it in the plant body through photosynthesis.
CoalFossil fuels such as oil and natural gas are equalement of primary energy sources formed by the evolution of ancient plants and animals buried underground over a long geological period. The energy contained in the earth itself generally refers to the energy related to the thermal energy it contains. the earth and the energy linked to atomic nuclear reactions.