This can prevent wastage of water resources caused by excessive water volume.
The thermostatic faucet can automatically balance the pressure of cold water and hot water in a very short time through the thermostatic adjustment valve core of the faucet to maintain stability of the outlet water temperature. There is no need to make any manual adjustments.
The mixed hot water used for showering is sprayed directly onto the human body through the shower head. Maintaining a consistent temperature can greatly improve the safety and comfort of showering. Use a constant temperature mixer fitted with a shower. head. This goal can be achieved.
Advantages and disadvantages of thermostatic showers
The thermostatic faucet can automatically balance cold water and water in a very short time thanks to the valve core thermostat adjustmenttick provided. With the tap. Hot water pressure is used to keep the outlet water temperature stable, without any manual adjustment.
The mixed hot water used for showering is sprayed directly onto the human body through the shower head. Maintaining a consistent temperature can greatly improve the safety and comfort of showering. A thermostatic mixer can achieve this goal.
Care tips
1. Please ask experienced professionals for construction and installation. When installing, the shower head should try not to collide with hard objects and not leave cement, glue, etc. on the surface to avoid damaging the gloss of the surface coating. Pay special attention to cleaning the debris in the pipes before installation, otherwise the shower head will be blocked by the debris in the pipes, affectingthus its use.
2. When the water pressure is not less than 0.02 mPa (i.e. 0.2 kgf/cubic centimeter), after using it for a while, if you find that the flow water decreases or even the water heater stalls, you can gently unscrew the screen cover at the water outlet of the shower head to remove impurities, and it will generally be restored to its original state. But remember not to disassemble the shower head by force. Due to the complex internal structure of the shower head, non-professionals are not allowed to disassemble it without authorization.
3. Do not use too much force when opening and closing the shower faucet and adjusting the shower water outlet mode. Just turn it gently. Even a traditional faucet doesn't require much effort. Take particular care not to support or use faucet handles and supportsshower rts as handrails.
4. The metal hose of the bathtub shower head should be kept in a naturally stretched state and should not be wrapped around the faucet when not in use. At the same time, be careful not to form a dead angle at the joint between the pipe and the faucet to avoid breaking or damaging the pipe.
The advantages and disadvantages are as follows:
1.Advantages
The effect constant temperature. it is very good. During daily use, the water pressure and water temperature in the water heater will change to a certain extent, but the thermostatic faucet can adapt to this situation very well and automatically adjust the water ratio. mixes hot and cold water in a very short time. time to reach a constant start setting temperature.
Can provide security protection. If there is aordinary shower installed in the bathroom, when we use it, we accidentally turn the handle to the extreme position, so the risk is relatively high. A shower at a constant temperature can very well avoid this situation. As long as the temperature is set correctly, no matter how you turn the handle, there will be no burning issues.
2. Disadvantages
Water pressure. When using a constant temperature shower, the normal water pressure should be between 0.05Mpa and 0.6Mpa. This is also a test for the water heater. For example, gas water heaters, instantaneous water heaters, solar water heaters, etc. with a small water supply are not suitable for use with constant temperature showers.
Price. Compared to ordinary showers, the price of thermostatic showers is higher.
The principle of a thermostatic shower
It is that there is a thermal element at the outlet of the thermostatic valve core of the shower faucet, and the characteristics of the temperature element are used to push the body of valve. The valve core moves to block or open the hot and cold water inlet. It blocks cold water and turns on hot water at the same time.
When the temperature reaches the set temperature, the ratio of hot water to cold water entering the water outlet automatically changes, so that the water temperature is maintained at a certain temperature and does not alternate between hot and cold.