The power output of silicon solar cells is easily affected by the external environment. When the load changes, the output power cannot reach the optimal output state. In order to improve the utilization rate of solar cells and achieve the best match between the output power of silicon cells and the load, the output power characteristics of solar cells were tested. During the experiment, a certain temperature range was set and the impact of the load on the output power and useful power of the silicon solar cell was tested by changing the load size, and the Experimental data were adjusted via Origin software. The results show that when the load is about 1.3 kΩ, the output power of silicon solar cells is the highest; when the load is about 1.5kΩ, the output power of silicon solar cellsum is stable when the load is about 1.65 kΩ; The power factor of silicon solar cells is the largest.
When measuring the characteristics of solar cells, the output power is greatest when the load is lar
Introduction In measuring the characteristics of solar cells, the output power is maximum when the load is large. The power output of silicon solar cells is easily affected by the external environment. When the load changes, its output power cannot reach the optimal o