Solar circulation pump works 24 hours a day. Most solar circulation pumps need to operate 24 hours a day and require a dedicated dual outlet to provide electricity: turn off the water hot under the faucet connection line to access the sink area. The closer the faucet is to the elbow, the faster hot water will flow from the pump circuit. Water from this pipe connection will return to the cold water pipe and then recirculate to the hot water tank. It is important that all hot water circulation pump circuits are insulated with foam insulated pipes.
Installing a solar circulation pump
Install the pipeline and connect the water inlet to the water pipe. Connect the water inlet hose to the water heater. Connect it to the drainage hole of the drainage pipe. Connect it from the water outlet to the shower outlet connection port. The water in the cold water pipe flows to the water heater and is heated by the water heater. Circulating pump refers to the pump used to circulate the liquid in the device to convey the reaction, absorption, separation and regeneration of the absorbed liquid. The circulation pump flow rate is average and under stable working conditions the pump flow rate changes relatively little.
Working principle
The magnet and impeller of the DC magnetic drive pump are injection molded into one body to form the motor rotor. Direct injection molded ring in the middle of the rotor. The high-performance ceramic shaft is fixed in the housing. The stator and motor circuit board are embedded in the pump body with epoxy resin glue. the stator and rotor, eliminating the need for a traditional mechanical seal. He is completelywaterproof. The torque of the motor is generated by energizing the coil on the silicon steel sheet to generate a magnetic field that drives the operation of the permanent magnet.
Required. After the solar power is unplugged and there is no water in the water tank or the temperature is not enough, it will not automatically fill the water and heat it, it must therefore be heated 24 hours a day, which is more practical. but a bit wasteful. Muyang Solar is a well-known brand in China's solar energy industry. It has four main production bases in Juxian, Shandong, Linyi, Shandong, Kunming, Yunnan and Yongning, Ningxia (under construction).