Yantai solar water heater disassembly method:
1. Cut off the power supply: Yantai solar water heater requires external power supply, so the power supply should be cut off before disassembly to avoid current damage to personal safety.
2. Drain water from water heater: Drain all water from water heater. You can use the water pump that comes with the water heater or other tools to drain the water to avoid water droplets or. water stains do not contaminate the environment during the disassembly process.
3. Disassemble the pipe: Unscrew the screws connecting the water heater to the pipe, then slowly remove the pipe. Note: When disassembling the pipe, remember to drain the water present in the pipe.
4. Remove the bracket: Remove any screws or other fasteners from the water heater bracket and remove the entire bracket. Please note that if the support is already connected to the water heater, yous must first remove the support then disassemble the water heater.
5. Remove the clamp: Remove the clamp holding the water heater, then slowly remove the water heater.
6. Cleaning work: Some cleaning and maintenance is required after dismantling. Pipes, brackets and the water heater itself should be cleaned to prevent corrosion and rust.
In short, disassembly of Yantai solar water heaters requires certain operating skills and precautions. Disassembly should be carried out according to the operation steps and safety should be ensured. If you are unsure how to do this, it is recommended to ask a professional to disassemble and clean it.
How much does it cost to dismantle a broken solar water heater
Unreasonable, it's illegal, which gives you the right to touch your things at will, just like your home Just like a television, a solar water heater is yourprivate property and no one has the right to take it away from you without your permission. If someone takes you down, call the police. If the police don't care about you, file a lawsuit with the police too and sue them for doing nothing.
For complete disassembly, you must first empty the water from the water tank, remove the upper and lower water pipes and external connections, then remove the pipes and finally remove the bracket . During the process of removing the pipe, first move the pipe a little in the water tank, slowly turn it, remove the bottom of the pipe from the pipe holder, and then remove it. If you encounter a pipe that is difficult to remove, first lower the beam that holds the pipe support underneath. Use cardboard to pad the bottom of the pipe, then remove it one by one. The price is subject to actual conditions.