It is better to use 10k solar water pipe probe. Solar water pipe probes include 10k, 5k, 47k, etc. The most common and common is the 10k. Consumer sensors such as Yeneng, Xizi and Bihuali all use 10k. The main function of the probe is to detect the water temperature of the water tank to determine whether the electric heating system of the water tank is started. When the water temperature is lower than the set lower limit temperature, the electric heating system will start automatically. . When the water temperature is higher than the set upper limit temperature, the electric heating system starts. The system automatically shuts down.
How do you know if the water level sensor of a solar water heater is broken?
It is located in the middle.
1. Place the water temperature probe into the water tank vent or the holeoverfull.
2. Insert the probe cable into the house and connect it to the monitor. This only displays the temperature and water level.
3. There is also one with automatic water supply, which adds a solenoid valve to the cold water pipe.
4. Add a tee to the hot water pipe and connect it to the solenoid valve.
5. Next, route the solenoid valve wire to the screen.
There are two reasons why the water level display meter of the solar water heater is broken:
1. The sensor is broken. Usually the sensor can be replaced.
2. The temperature and water level probe is broken, simply replace it.
If you are not very familiar with circuits and solar energy, it is recommended to hire a professional repairer to repair it to avoid danger.
The solar water heater is a device that converts solar energy into thermal energye, heating water from low temperature to high temperature to meet people's use of hot water in life and production. Solar water heaters are divided into vacuum tube solar water heaters and flat panel solar water heaters based on their structural shapes. Evacuated tube solar water heaters are mainly used, accounting for 95% of the domestic market share. Household evacuated tube solar water heaters are composed of heat collecting tubes, water storage tanks, brackets and other related parts. The conversion of solar energy into thermal energy mainly relies on vacuum heat collecting tubes which use the principle of hot water floating. and cold water flows to cause microcirculation in the water.