When installing an outdoor solar mosquito lamp, the first thing to consider is lighting. People should install it in a place with enough light, otherwise the battery will not be charged. Therefore, outdoor solar mosquito repellent lights should not be installed under trees or on the backlight of buildings. In addition, when installing outdoor solar mosquito repellent lights, you should pay attention to the following two points.
1. Precautions for installing outdoor mosquito killer lamps for personal households
① If the outdoor solar mosquito lamp is installed for personal household use, it is It is best to choose an earth connection. This makes installation and moving easier.
② If the outdoor solar anti-mosquito lamp is installed for use in a public area, it is better to use screws tosecure the lamp so that it will not be knocked over or stolen.
③. The installation position of the outdoor solar anti-mosquito lamp can be placed on the edge of the lawn, or in the middle of the green belt, or on the side of the swimming pool where people do not often do so. Go over there. There are a lot of mosquitoes in these three places, so using outdoor solar mosquito repellent lights has the best effect.
2. Precautions for the installation of commercial outdoor mosquito lamps
① People should consider the power wiring of the entire outdoor solar mosquito lamp. If it is just a mosquito lamp installation, just consider installing it where there is power. If you install outdoor solar anti-mosquito lights in large quantities, it is best to carefully consider the entire electrical wiring and choose a line if you can.uve to make it work until the end. Otherwise, choose a place with reserved external power.
2. The best way to fix the outdoor solar mosquito lamp is on a cement base. Since the municipal solar outdoor mosquito lamp needs to be connected to 220V AC, there is a certain risk of electricity consumption. Therefore, it is better to route the power supply of the mosquito killer lamp underground and the wiring is inside the lamp body. At the same time, the mosquito lamp should be firmly fixed with cement base + expansion screws to avoid being knocked down by the wind. Or be knocked down.
Solar mosquito killer lights do not require wiring and can be used simply after installation. Think about it, you bought a solar mosquito lamp online and finally received it. Isn't it difficult to wire it? AinIf so, those that require wiring should be eliminated. Today's solar mosquito repellent lights do not require wiring. Just like this one, you can just buy it and flip the switch.