Solar mosquito killer lights do not require wiring and can be used simply after installation. Think about it, you bought a solar mosquito lamp online and finally received it. Isn't it difficult to wire it? So, those that require wiring should be eliminated. Today's solar mosquito repellent lights do not require wiring. Just like this one, you can just buy it and flip the switch.
Which is better, wind suction solar insecticide lamp or electric shock insecticide lamp?
When installing solar mosquito repellent lamps exterior, the first thing to consider is the Lighting. People should install it in a sufficiently sunny place, otherwise the battery will not charge. Therefore, outdoor solar mosquito repellent lights should not be installed under trees or on the backlight ofbuildings. In addition, when installing outdoor solar mosquito repellent lights, you should pay attention to the following two points.
1. Precautions for installing outdoor mosquito killer lamps for personal households
① If the outdoor solar mosquito lamp is installed for personal household use, it is It is best to choose an earth connection. This makes installation and moving easier.
② If the outdoor solar anti-mosquito lamp is installed for use in a public area, it is best to use screws to fix the lamp so that it will not be knocked over or stolen .
③. The installation position of the outdoor solar anti-mosquito lamp can be placed on the edge of the lawn, or in the middle of the green belt, or on the side of the swimming pool where people do not often do so. Go over there. There are a lot of mosquitoes in these three places, so useation of outdoor solar anti-mosquito lights has the best effect.
2. Precautions for the installation of commercial outdoor mosquito lamps
① People should consider the power wiring of the entire outdoor solar mosquito lamp. If it is just a mosquito lamp installation, just consider installing it where there is power. If you install outdoor solar anti-mosquito lights in large quantities, it is best to carefully consider the entire electrical wiring and choose a line if you can run it all the way. Otherwise, choose a place with reserved external power.
2. The best way to fix the outdoor solar mosquito lamp is on a cement base. Since the municipal solar outdoor mosquito lamp needs to be connected to 220V AC, there is a certain risk of electricity consumption.tricity. Therefore, it is better to route the power supply of the mosquito killer lamp underground and the wiring is inside the lamp body. At the same time, the mosquito lamp should be firmly fixed with cement base + expansion screws to avoid being knocked down by the wind. Or be knocked down.
The principles of attracting insects with wind-suction solar insecticide lamps and electric shock insecticide lamps are the same, but the difference lies in the method of killing insects. The air suction type relies on a fan to blow the insects into the insect collection bag to dry them to death, while the electric shock type directly shocks the insects with electricity to high tension. Orchard bugs are relatively large, so my personal suggestion is that the flooded type is better. Next comes the inse lampelectric shock insecticide, and finally the air suction insecticide lamp.