With the popularity of solar street lights, many consumers want to know how to assemble solar street light poles. Let's take a look at the advantages of solar street light poles and the assembly methods of solar street light poles for your reference.
Advantages of solar street lighting poles
The installation is simple, there is no need to lay messy lines, just dig a small hole, a cement base and fix it with stainless steel. screws. Solar street light poles rely on solar energy to convert into electricity, so there is almost no investment after construction. They only require daily maintenance and aging equipment repairs. Even if the acquisition cost is relatively high. But the cost will be recovered gradually thereafter. The lifespan of solar lighting poles is longer thane that of the lighting poles of municipal circuits.
Assembly method of solar light pole
1. Check whether the light pole model at the installation position is correct (such as single head, double head) and match the corresponding model. arm length; Cut the wire at the corresponding position, and generally leave 150MM at each end of the stripped wire.
2. Install the jump arm and lamp head, determine the position and level of the lamp, and use the lamp pole as a reference.
3. After wiring, check whether the light wire is tight and firm.
4. Connect the light source and the thread. Connect the wires correctly according to the instructions, paying attention to the positive and negative poles.
5. After connecting the cable, check if the connection is firm. When installing the light source, ensure that the light projection surfaceof the light source is perpendicular to the ground and not to the surface of the installation arm.
6. After connecting the light source, first use a multimeter to test its resistance and whether it is grounded with the post, then use a battery to test the light source to confirm the connection is correct.