There are several steps to fix the solar light on the steel pipe:
1. Choose a suitable position on the steel pipe and use an electric drill to drill a small hole.
2. Insert the expansion screw into the small hole, then use a hammer to drive the expansion screw into the steel pipe.
3. Attach the solar light base to the expansion screw, making sure the base is perpendicular to the steel pipe.
4. Install the solar light on the base and make sure the lamp body and base fit perfectly.
5. Use screws to fix the solar light to the base to ensure that the lamp body will not shake.
Here is how we installed it: support the solar panel, remove the rear legs, connect the barrel bracket with thicker angle iron, then place the barrel bracket and water tank on the roof ridge, connect the pipes, then connectConnect the pipe to the solar water tank. Pump the water and put in the glass tube as you go. Once the installation is complete and checked for leaks, use cement to cover the part of the backing near the tiles, then use stone bars and other heavy objects to knock down the front and back of the tile. solar energy (don't be too heavy to crush it). tiles), so solar energy looks like solar energy. The roof is integrated and can withstand level 7-8 winds even if the solar power fails. You can also ask the dealer to replace it with a solar panel specially designed for the ridge type