1. To prepare the materials, you must first prepare the following materials: solar panels, PVC pipes, tees, elbows, internal joints, glue, insulating pipes, paint, electronic thermometers, old iron sheets, plastic foam and old sponges wait.
2. First find solid, good quality wood and simply make a 2.1X1.2m frame. Then transform the T-pipe into a hot exhaust pipe of the same type as the water heater device. Then pour foam over the frame and paint the foam and the old iron sheet black.
3. Connect the shelf made of solar panels to the thermal tube. Note that the pipe must be installed with an insulating tube. If you have an electronic thermometer, you can install an electronic thermometer for easier detection. of the water temperature.
4. Install the vertical post behind the support and cardboard. The height and inclination of thisVertical pole can be adjusted at will. Then the glass tube is filled with water and the glass tube is first sealed and then placed on the rack. Then adjust the pole, observe the direct angle of the sun and adjust the pole to the corresponding height. The larger the area exposed to the sun, the better.
5. When adjusting the concave arc of the pole, you should do it on the roof of a building exposed to the sun or in a high place. The reflection of the sun focuses on the glass tube. better effect. Then simply attach the bracket.
6. After a while, the homemade solar water heater can use the principle that cold water flows and hot water floats to check the water temperature. Then wait a while, then check the amount of hot water obtained. You can also fill the homemade solar water heater with appropriate amount of water according to the weather of the day and connect the hosethe water outlet to where hot water is needed.
What are the ways to install solar PV racks
Required materials: hooks, guide rails, related components.
The steps to install solar power on a tile roof house are as follows:
1. Find a good position on the tiled roof house and prepare the positioning of the hook
2. After positioning, fix the hooks
3. Lay the track and prepare the components
4 Download the components one by one and arrange them
5. Install the components
6. Components of the series
7. Installation completed
There are several ways to proceed. install photovoltaic solar racks:
① Ground installation: Fix the photovoltaic rack to the ground, usually using concrete foundations or steel piles as supports.
②.Roof installation: install thephotovoltaic support on the roof of the building, usually using special clamps to attach the support to the roof structure.
Case of photovoltaic support on the Kesheng roof
③. Wall installation: Install the photovoltaic bracket on the exterior wall of the building. Special brackets and bolts are usually used to attach the bracket to the wall. . superior.
④.Floating installation: install the photovoltaic rack on the water surface, usually using pontoons or pontoons as supports.
Selecting an appropriate installation method requires several considerations. Factors include building structure, terrain conditions, lighting conditions and installation costs.