First of all, there is some relationship, but it's not entirely a problem with supercharged showers. If this problem is a common problem, is there still a market for supercharged showers? Do we need 10 basins of water to produce hot water on the first floor?
Reasons for slow water output from hot water outlet of solar water heaters:
1. The height of the solar energy is not enough, and the natural pressure formed is insufficient.
2. The water pressure in the water pipe is too low, and the pressure difference between the water heater tank and the nozzle is very small, so the pressure is low after the water is mixed.
3. The nozzle has few holes or is partially blocked by impurities.
Processing method:
1. Use a booster pump and turn it on when the solar outlet is used more.
2. Wait for the water pressure togment.
3. Replace the nozzle with a large volume of water spray or clean the nozzle.
If the water flow at the bottom is normal, you can consider the water pressure problem.
Solution: 1. Replace the developer-provided pressurized solar power with the designed pressurized solar power on the top floor. 2. The water tank is equipped with a pressure booster pump in order to increase the hot water pressure, a hot water booster pump can be added to the solar hot water pipe on the roof, this which can solve the problem of hot water pressure. 3. The principle of thermostatic mixing valve replacement is to use the characteristics of the temperature sensing element at the mixture outlet to promote the movement of the valve core in the valve body and block or open the inlet hot and cold water.