How to make a starry sky bottle with crystal glue and luminous powder?

Materials needed to make a starry sky bottle include: clear glass bottle, crystal glue, luminous powder, water, bleaching powder, bleaching water, stirrer, funnel, a small funnel and star stickers.

First, clean the glass bottle with bleaching powder and bleach to make sure there is no dirt or grease on the surface.

Then pour an appropriate amount of crystal glue into a container, add an appropriate amount of water, and stir evenly with a stirrer to make the crystal glue finer.

Then put the funnel into the mouth of the glass bottle, pour the luminous powder into the funnel, and pour the luminous powder into the glass bottle through the small funnel. The amount of luminous powder can be determined according to your personal preferences. If youWant a brighter effect, you can increase the amount of luminous powder appropriately.

Then pour the crystal glue into the glass bottle, be careful not to overfill it and leave some space.

Then close the glass bottle tightly and shake it to completely mix the luminous powder and crystal glue.

Then stick the star stickers on the inner wall of the glass bottle. You can decide the number and position of the stars according to your personal preferences.

Finally, place the prepared starry sky bottle in a well-lit place to allow the luminous powder to absorb the light, and you can see the beautiful effect of the starry sky at night.

The process of making a starry sky bottle requires care and patience, to ensure that each step is done correctly. Once production is completed, the sky bottlestarry can be placed in the bedroom or living room to add a romantic and mysterious atmosphere to the space.

How to make a glowing starry sky ball

Materials:

1. Glass bottle, any transparent bottle

2. , Or TB collects starry sky bottle glue.

3. Luminous powder, luminous sand, fluorescent powder, available in TB

Glowing sand has large particles and has only two colors: blue-green and yellow-green

Glows in black Powder is in powder form and has many colors

Auxiliary materials:

Beaker (dish), stirrer, toilet paper

Steps production:

Part 2: Wipethe bottle and pour the mixed glue into it. Rotate the bottle so that the glue evenly coats the sides of the bottle. Discard excess glue drop by drop. Turn the bottle upside down and wait for the gel to harden.

It takes about 4 hours to reach a usable viscosity, so you can prepare several bottles at a time to complete it together.

Step 3: Mix the two fluorescent sands while waiting. If the particles are too large, you can crush them. Add a small amount of luminous powder to color it.

What should be noted here is that the intuitive color of fluorescent sand is not obvious, but the luminous effect is outstanding. The intuitive color of the fluorescent powder is obvious, but the luminous effect is weak. In addition, in the next step, if fluorescent powder is stuck to the inner wall of the bottle, it will not be easy for fluorescent sand to stick to it.r. So adjust the amount of fluorescent material according to your needs.

Step 4: When the glue on the inner wall of the bottle has only a little viscosity left, gently sprinkle the prepared fluorescent material into the bottle and shake the bottle to adjust it to the desired distribution. (To check the viscosity, you can drop two drops of glue elsewhere in the second step to test the degree of solidification.)

Step 5: Finish.

Note:

After the last step is completed, if you want to add a layer of glue to the bottle to strengthen it, you should wait until the first layer is almost solidified, otherwise the second layer will remove your distributed fluorescent material.

In addition, it is recommended that the distribution of fluorescent sand be dense and dense, so as to have the effect of a starry sky. Of course, everyone has their own preferences, and there is no fixed production. mmethod. Glue can be used as desired.